PREPARATION OF THE SUPPORT: the surfaces must be clean, free of dust, oil and grease. Crumbly parts, paint residues and anything that may affect the adhesion. Any metal supports present in the affected areas must be free of rust, rolling slag and other impurities. For this purpose we recommend to intervene with an energetic brushing and with a special primer.

PREPARATION OF THE SUPPORT: pour component B (catalyst) into component A (resin) and mix with low-speed drill to avoid air fouling. Gradually add under stirring the inert (quartz) until a homogeneous and free of lumps compound is obtained. EPOXY FLOOR must be applied at a temperature between +10°C and +30°C. Caution: do not apply to wet or dusty substrates and do not apply if the primer is hardened

APPLICATION: EPOXY FLOOR can be used as:
1) PRIMER (A+B) mix only A+B and then spread evenly with a medium-haired roller on the surfaces to be reconstructed.
2) BINDER FOR RECONSTRUCTION MORTAR (A+B+INERT) Mix A+B and add the inert material in the doses and ways indicated.
– Before the primer hardens, apply the reconstruction mortar, in the required thickness, made up of EPOXY FLOOR A+B and aggregates.
– Working and smoothing the mortar with a helicopter using fine blades and finishing with smooth, flush trowels.
Once hardened, saturate the surface with EPOXY FLOOR A+B and apply the specific finish, for example: EPORIV 30/FR or POLYLUX COLOR/FR.